[BSTRAP] MAC signature of All the partitions are OK ....
[BSTRAP] Start highlevel code.
BOOT_OK!LDR_OK
LZMA Decompression...ok
Board: MSTAR KRNOUS (CPU Speed 552 MHz)
DRAM: 256 X 0 MBytes
Flash is detected (0x0706, 0xEF, 0x40, 0x18)
MDrv_SERFLASH_GetInfo()
u32AccessWidth = 1
u32TotalSize = 16777216
u32SecNum = 256
u32SecSize = 65536
drv_system_init--OOOOOOOOOOOO
ABCD========logo test ......
Loader Core vDCD4304 Irdeto BootLoader V1.03(May 14 2013 - 10:03:30)
Copyright (c) 2002-2004 Irdeto Access B.V., All rights reserved.
enter MDrv_GREEN_LED
Flash is detected (0x0706, 0xEF, 0x40, 0x18)
MDrv_SERFLASH_GetInfo()
u32AccessWidth = 1
u32TotalSize = 16777216
u32SecNum = 256
u32SecSize = 65536
[osdCreate]enPanelType=0x8
MDrv_PNL_Init u32PnlRiuBaseAddr = BF200000
MDrv_PNL_Init u32PMRiuBaseAddr = BF000000
GE_SetOnePixelMode
driver GE init ok
DAC eTiming =2
HDMITx eTiming =2
HDMITx eTiming =2
GWIN width:720, height:576
offset = 18 barBackColor=0xA0A0A0 barFrontColor=0x747474 DataBackColor=0xD61921 DataFrontColor=0xA0A0A0
in=0x80100139, in_size=0x624C, out= 0x80106490, alloc_buf = 0x81000000
in=0x80100139, in_size=0x624C, out= 0x80106490, alloc_buf = 0x81000000
in_size=25164 out_size=1437120 unpack_size=0
LZMA Decompression...ok unpack_size=0xBF203104
JPEGFlag=0x64686468
(Re)start USB 1...
Check USB port[1]:
??? Waiting for Peripheral Connecting Fail...
usb init failed
Error, couldn't init Lowlevel part
(Re)start USB 1...
Check USB port[1]:
??? Waiting for Peripheral Connecting Fail...
usb init failed
Error, couldn't init Lowlevel part
delay 3s
[BSTRAP] [BSTRAP] Init done!
[BSTRAP] Reset type: cold boot 0x0
[BSTRAP] Checking for key sequence...
FP_DRV_AcquireKey[0] is 0
FP_DRV_AcquireKey[0] is 0
FP_DRV_AcquireKey[0] is 0
FP_DRV_AcquireKey[0] is 0
FP_DRV_AcquireKey[0] is 0
FP_DRV_AcquireKey[0] is 0
[BSTRAP] Timeout.
[BSTRAP] Checking for download type...
[UART_IFC] Temu Start (STB <- Temu)
[UART_IFC] Byte number = 0
[UART_IFC] Byte sequence = 0xB0 0x76 0x00 0x00
[UART_IFC] Temu Start (STB <- Temu)
[UART_IFC] Byte number = 0
[UART_IFC] Byte sequence = 0xB0 0x76 0x00 0x00
[USBDownload_CheckUpgrade] No USB download File
[NVM_MNG] Loader PT CRC16 OK. wCRC_16=0x0 , pstBuf->wCRC16 =0x0
[BSTRAP] No any download required.
[BSTRAP] Performing flash test...
[FLSH_MNG_VerifyCPCB]Read SPCB.SPCB=0x803E6010
[FLSH_MNG_VerifySPCB] partition count=0xF9
[FLSH_MNG] securechip address and length is 803E6010 00001489.
[FLSH_MNG] securechip MAC is CD .
[FLSH_MNG] stored MAC is CD.
[FLSH_MNG] securechip MAC is E8 .
[FLSH_MNG] stored MAC is E8.
[FLSH_MNG] securechip MAC is 26 .
[FLSH_MNG] stored MAC is 26.
[FLSH_MNG] securechip MAC is 68 .
[FLSH_MNG] stored MAC is 68.
[FLSH_MNG] securechip MAC is 03 .
[FLSH_MNG] stored MAC is 03.
[FLSH_MNG] securechip MAC is 47 .
[FLSH_MNG] stored MAC is 47.
[FLSH_MNG] securechip MAC is 1F .
[FLSH_MNG] stored MAC is 1F.
[FLSH_MNG] securechip MAC is 46 .
[FLSH_MNG] stored MAC is 46.
[FLSH_MNG] securechip MAC is 0A .
[FLSH_MNG] stored MAC is 0A.
[FLSH_MNG] securechip MAC is E9 .
[FLSH_MNG] stored MAC is E9.
[FLSH_MNG] securechip MAC is 6A .
[FLSH_MNG] stored MAC is 6A.
[FLSH_MNG] securechip MAC is 70 .
[FLSH_MNG] stored MAC is 70.
[FLSH_MNG] securechip MAC is 51 .
[FLSH_MNG] stored MAC is 51.
[FLSH_MNG] securechip MAC is 5B .
[FLSH_MNG] stored MAC is 5B.
[FLSH_MNG] securechip MAC is 1F .
[FLSH_MNG] stored MAC is 1F.
[FLSH_MNG] securechip MAC is 9C .
[FLSH_MNG] stored MAC is 9C.
[FLSH_MNG] CRC_PCB CRC32 passed.
[FLSH_MNG_ReadSPCB]SPCB=0x803F6010[BSTRAP] MAC signature of All the partitions are OK ....
[BSTRAP] Start highlevel code.
in=0x8400001C, in_size=0xA0ACBF, out= 0x80000180, alloc_buf = 0x81800000
in=0x8400001C, in_size=0xA0ACBF, out= 0x80000180, alloc_buf = 0x81800000
in_size=10529983 out_size=19240564 unpack_size=0
LZMA Decompression...CRC_result F0956F37 CRC_value F0956F37
CRC check success !!
ok
go 0x80000224
## Starting application at 0x80000224 ...
[cyg_net_init] Init: mbinit(0x00000000)
[cyg_net_init] Init: cyg_net_init_devs(0x00000000)
Init device 'pcnet_eth0'
[cyg_net_init] Init: loopattach(0x00000000)
[cyg_net_init] Init: ifinit(0x00000000)
[cyg_net_init] Init: domaininit(0x00000000)
[cyg_net_init] Init: cyg_net_add_domain(0x81241030)
New domain internet at 0x00000000
[cyg_net_init] Init: cyg_net_add_domain(0x81240bf8)
New domain route at 0x00000000
[cyg_net_init] Init: call_route_init(0x00000000)
[cyg_net_init] Done
[eCos][CPU INFO] : CPU Clock = 552000000 : RTC Period = 276000
Hardware Initialize...
MDrv_MIOMap_Init
[HAL_MIU_SetPMIOMapBase][1266] Non implement for MIU _gPM_MapBase= bf000000
MsOS_Init
_MApi_SystemInit_CreateMemoryPool
mdrv_gpio_init
MDrv_IIC_Init
MDrv_IIC_Init PORT 1
MDrv_IIC_InitPort0: OK
2223 MDrv_EMAC_Init 23:43:40 Mar 11 2015
_MApi_SystemInit_InitHW finish
================================================== ===================================
[MAPI_MEMINFO] 1 MIU: System Memory Usage
[MAPI_MEMINFO] ============================ START END SIZE
[MAPI_MEMINFO] POOL_START 0x00000000 0x0208e900 0x0208e900
[MAPI_MEMINFO] Cached Pool Start 0x0208e900 0x0258e900 0x00500000
[MAPI_MEMINFO] NONCACHED_POOL_START 0x0258e900 0x03248800 0x00cb9f00
[MAPI_MEMINFO] NONCACHED_APP_START 0x08000000 0x10000000 0x08000000
[MAPI_MEMINFO]
[MAPI_MEMINFO] Memory Layout:
[MAPI_MEMINFO] ============================ START END SIZE
[MAPI_MEMINFO] MM_ADR 0x03248800 0x0424f800 0x01007000
[MAPI_MEMINFO] SECTION_BUF_ADDR 0x0424e800 0x0424e800 0x00000000
[MAPI_MEMINFO] JPD_READBUFF_ADR 0x0424e800 0x04cc3000 0x00a74800
[MAPI_MEMINFO] SDRAMADDR_FONT 0x04cc3000 0x04cc3000 0x00000000
[MAPI_MEMINFO] SDRAMADDR_BMP 0x04cc3000 0x04cc3000 0x00000000
[MAPI_MEMINFO] XC_MENULOAD_BUFFER_ADR 0x04cc3000 0x04cc7000 0x00004000
[MAPI_MEMINFO] TSP_FW_BUF 0x04cc7000 0x04ccb000 0x00004000
[MAPI_MEMINFO] TSP_VQ_BUF 0x04ccb000 0x04ccc000 0x00001000
[MAPI_MEMINFO] GOP_DMAMEM_START 0x04ccc000 0x04ccd000 0x00001000
[MAPI_MEMINFO] GOP_GWIN 0x04ccd800 0x055db000 0x0090d800
[MAPI_MEMINFO] PM51_LITE_LEN 0x055db000 0x055f0000 0x00015000
[MAPI_MEMINFO] PM51_LOADER_ADR 0x055f0000 0x055fa000 0x0000a000
[MAPI_MEMINFO] PM51_VAR_MEM_ADR 0x055fa000 0x055fa400 0x00000400
[MAPI_MEMINFO] PM51_MEM_SR_ADDR 0x055fb000 0x055fb400 0x00000400
[MAPI_MEMINFO] PM51_MEM_ADR 0x055ff000 0x055ff400 0x00000400
[MAPI_MEMINFO] VE_MEM_START 0x05600000 0x05800000 0x00200000
[MAPI_MEMINFO] VDEC_MEM_START 0x05800000 0x07800000 0x02000000
[MAPI_MEMINFO] MAD_SE_START 0x07800000 0x07900000 0x00100000
[MAPI_MEMINFO] MAD_DEC_START 0x07900000 0x07b00000 0x00200000
[MAPI_MEMINFO] XC_MEM_START 0x07b00000 0x08000000 0x00500000
[MAPI_MEMINFO] pFirstAvailableMemory 0x0208e900
================================================== ===================================
MIU Initialize...
Get IOMap u32NonPmBase = 0xbf200000
Get IOMap u32NonPmBase = 0xbf000000
Disable MIU1
Auth OK
=================>>>>>>>>>>>>>>>.. WakeupType = 0, time = 57
[EK_SystemInit][90] entry....!
Get IOMap u32NonPmBase = 0xbf200000
Get IOMap u32PmBase = 0xbf000000
0854 EMAC_PhyAddrScan phy [0]=ffff
0854 EMAC_PhyAddrScan phy [1]=ffff
0854 EMAC_PhyAddrScan phy [2]=ffff
Flash is detected (0x0706, 0xEF, 0x40, 0x18)
MDrv_SERFLASH_GetInfo()
u320854 EMAC_PhyAddrScan phy [3]=ffff
AccessWidth = 1
u32TotalSize = 16777216
u32SecNum = 256
u32SecSize = 65536
MDrv_Keypad_Task
0854 EMAC_PhyAddrScan phy [4]=ffff
0854 EMAC_PhyAddrScan phy [5]=ffff
0854 EMAC_PhyAddrScan phy [6]=ffff
0854 EMAC_PhyAddrScan phy [7]=ffff
0854 EMAC_PhyAddrScan phy [8]=ffff
0854 EMAC_PhyAddrScan phy [9]=ffff
0854 EMAC_PhyAddrScan phy [10]=ffff
0854 EMAC_PhyAddrScan phy [11]=ffff
0854 EMAC_PhyAddrScan phy [12]=ffff
0854 EMAC_PhyAddrScan phy [13]=ffff
0854 EMAC_PhyAddrScan phy [14]=ffff
0854 EMAC_PhyAddrScan phy [15]=ffff
0854 EMAC_PhyAddrScan phy [16]=ffff
0854 EMAC_PhyAddrScan phy [17]=ffff
0854 EMAC_PhyAddrScan phy [18]=ffff
0854 EMAC_PhyAddrScan phy [19]=ffff
0854 EMAC_PhyAddrScan phy [20]=ffff
0854 EMAC_PhyAddrScan phy [21]=ffff
0854 EMAC_PhyAddrScan phy [22]=ffff
0854 EMAC_PhyAddrScan phy [23]=ffff
0854 EMAC_PhyAddrScan phy [24]=ffff
0854 EMAC_PhyAddrScan phy [25]=ffff
0854 EMAC_PhyAddrScan phy [26]=ffff
0854 EMAC_PhyAddrScan phy [27]=ffff
0854 EMAC_PhyAddrScan phy [28]=ffff
0854 EMAC_PhyAddrScan phy [29]=ffff
0854 EMAC_PhyAddrScan phy [30]=ffff
0854 EMAC_PhyAddrScan phy [31]=ffff
1129 NegotiationPHY
NegotiationPHY : point 11146 NegotiationPHY
NegotiationPHY : point 21162 NegotiationPHY
NegotiationPHY : point 3
************************************************** ****
ProPoolMAXLength = 1000, MAX_TVNum = 900, MAX_RadioNum = 100
Program info size = 72,
Alloc program memory size = 72000,
DeliveryPoolMAXLength = 100,
Delivery info size = 24,
Alloc delivery memory size = 2400,
Alloc total memory size = 74400,
************************************************** ****
MDrv_PNL_Init u32PnlRiuBaseAddr = bf200000
MDrv_PNL_Init u32PMRiuBaseAddr = bf000000
[_MDrv_PNL_Init_LPLL][295]pstPanelInitData->u16Width=1920, pstPanelInitData->u16Height=1080
[_MDrv_PNL_Init_LPLL][297]u16HTotal=2640,u16VTotal=1125,pstPanelInitData->u16HTotal=2640,pstPanelInitData->u16VTotal=1125, u16DefaultVFreq=50
[_MDrv_PNL_Init_Output_Dclk][340]pstPanelInitData->u16Width=1920, pstPanelInitData->u16Height=1080
[_MDrv_PNL_Init_Output_Dclk][342]u16HTotal=2640,u16VTotal=1125,pstPanelInitData->u16HTotal=2640,pstPanelInitData->u16VTotal=1125, u16Default0
[XC,Version] 00442327
UTOPIA ASSERT: 0 /home/tsaihua/DDIK1ECOS/THEALE/utopia/project/k1_ecos/../../mxlib/hal/k1/xc/mhal_sc.c Hal_SC_set_ficlk 224
DAC eTiming =6
DAC eTiming =6
HDMITx eTiming =7
>>>>>>>>>>>>>> yaunqinhao 2 cropheight != 0
Source Video Size Error!!
HD width = 1920 height = 1080
[yuanqinhao] SD DstWin dispInfo x = 0 y = 0 width = 720 height = 576
0877 EMAC_CableConnection Link change ffff
Source Video Size Error!!
sd width = 720 height = 576
[GOP_ALL, PID 0][Driver Version]: 0088, BuildNum: 0004, ChangeList: 00643200
====================
First GOP driver instance, flush GWIN HW
====================
Set to Mixer
GOP_FUN_NOT_SUPPORTEDEMAC: init done
0986 EMAC_CheckDuplex EMAC Link Status(0000ffff): 0996 EMAC_CheckDuplex 100M Full
create Audio SHM data ...
HAL_MAD_SetMemInfo[DSP_DEC] = 0x07900000
HAL_MAD2_SetMemInfo[DSP_SE] = 0x07800000
MApi_DigiTuner_TPSGetLock: Obtain mutex failed.
Initializing Application Manager
kkkkkkkkkkkkkkkkkkk eTunerDemodType = 3
MApi_DigiTuner_Init
MApi_DigiTuner_Init mutex id 1985216543
VVVVVVVVV MApi_Init_Frontend_Device , 340 VVVVVVVVV
MxLWare603_API_CfgDevSoftReset
MxLWare603_API_CfgDevOverwriteDefaults
MxLWare603_API_CfgDevXtal
MxLWare603_API_CfgTunerIFOutParam, Manual set = 0
MxLWare603_API_CfgTunerAGC, AGC sel = 1, attack point set = 66, Flip = 0
MxLWare603_API_CfgTunerMode: Signal Mode = 0, IF Freq = 5000, xtal = 1, IF Gain = 11
MxLWare603_API_CfgTunerLoopThrough
MXL603 INIT OK
Inited_Cnt ========== 1 ,FE_index = 3
==== TSP Mode Enable ====
FWAddr = 04CC7000 , Size = 00003000 , VQAddr = 04CCB000 , VQSize = 00001000
************************ Start TSP_Init ************************
<FWTSP> : >> FwVersion:002F2500 , Date:20121205
************************* End TSP_Init *************************
DMX_INPUT_INV == 0
DMX_INPUT_INV == 0
[EK_TTX_Init][417] : enter EK_TTX_Init
[EKGetTimeInit] enter!
[EKEPG_Init][35], MemSize:400000
ektplb_get_list_handle_by_focus() LINE[119] Error : Invalid param!
ektplp_get_cur_pro_par() LINE[2612] Error : ektplp_get_cur_list_handle failed!
[EKIEPG_ShellStartSecParse][397], ret:1, ERROR!
[EKEPG_Init][104] Start Parse failed!
load fw to u32FwSCAddr 55f0000
Wait for PM51 standby...........
PM51 run ok...........
E_MBX_CLASS_PM_WAIT - MBX register msg
E_MBX_CLASS_PM_WAIT - MBX register msg success
I_HLSUP_GetStatusInfo
----> 1
M_HLSUP_GetBBInfo
----> u8FailedBlocks:0
----> 3
----> 4
----> 5
pstStatus->u16SysID=0x142
----> 6
pstStatus->u16KeyVer=0x0
----> 7
pstStatus->u16Variant=0x142
----> 11
----> 12
pstStatus->u16SigVer=0x18
[FLSH_MNG_VerifySPCB] partition count=0xf9
[VD_Initialise] bLoad_sequence_number:24
[VD_Initialise] bPartition_count:249
[VD_Initialise] uBin2ird_version:858857590
[VD_Initialise] uBin2ird_serial_number:808464433
[VD_Initialise] wDownload_duration:172
[VD_Initialise] uImage_size:10555493
[VD_Initialise][236], SerialNumber:H1448011304044
[VD_Initialise][237], CSSN:a0d5d2d4
Error!! please add AGC table
[GenCreateBitmap][327], bitmap:aec8dc8c
[GenCreateBitmap][341], add:aec8dcb0
[GenCreateBitmap][345], bitmap->Pixel:aec8dcb8
[Appman_EventHandlerTask][260]
[EKEPG_FilterServiceInit][390], EPG, ERR:
USB init
@@@@@@@@@@@ appMM_Browser_Init =========>
@@@@@@@@@@@ appMM_Browser_Init Success =========>
MDrv_Usb_Init
Usb init
The base address is 0xA2E38000
Base addr is 0xA2E38000
Top addr is 0xA2E57FFF
Pages per pool is 32
Bit map base addr is 0xa2e372b0
MDrv_USB_Port_Init 0
usb_init start, UTMI base 0xbf207500, USBC base 0xbf200e00, UHC base 0xbf204800
Error!! please add AGC table
usb_hcd_cpe_ehci_probe
ehci: 8258d750
hcd: 8258d784
The allocated addr is 0xa2e38000, bit_map[0] is 0xFFFFFFFE
qh: 0xa2e38000, qh->qh_dma: 0x02e38000
The allocated addr is 0xa2e39000, bit_map[0] is 0xFFFFFFFC
The allocated addr is 0xa2e3a000, bit_map[0] is 0xFFFFFFF8
qh: 0x02e38000
usb_set_address 1 after
USB device product string (index 2) = CPE_AMBA EHCI
The allocated addr is 0xa2e3b000, bit_map[0] is 0xFFFFFFF0
<register_root_hub> hcd->rh_registered = 1
InitUSBIntr enter
Usb start..
usb_init start, UTMI base 0xbf20UsbTask..
5400, USBC base 0xbf220400, UHC base 0xbf220600
ehci_cpe_dev_init_Port2 enter
ehci_hcd_cpe_ehci_drv_probe_Port2 enter
usb_hcd_cpe_ehci_probe port2
ehci: 8258bc90
hcd: 8258bcc4
The allocated addr is 0xa2e3c000, bit_map[0] is 0xFFFFFFE0
qh: 0xa2e3c000, qh->qh_dma: 0x02e3c000
The allocated addr is 0xa2e3d000, bit_map[0] is 0xFFFFFFC0
The allocated addr is 0xa2e3e000, bit_map[0] is 0xFFFFFF80
qh: 0x02e3c000
usb_set_address 1 after
USB device product string (index 2) = CPE_AMBA EHCI 2
The allocated addr is 0xa2e3f000, bit_map[0] is 0xFFFFFF00
<register_root_hub> hcd->rh_registered = 1
InitUSBIntr_Port2 enter
Usb 2 start..
MDrv_Usb_Done ...UsbTask 2...
..............................................
enter msApi_SetMIUPriority_forPVR_Test
pvr2.0 init:
[ekpvr_system_parameter_load][242]
[PVR_setting_load_callback][131]load PVR setting parameter!
[ekpvr_system_parameter_load][274]Warning: CRC different, reset PVR default setting!
EKPVR_FILEVIEWER_INIT(): -->register_callback()
[EKPVR_Porting_RecorderInit]:===============EKPVR_Porting_RecorderInit======== ===============
[_EKT_PVR_ResetProgramInfo]:0x812a3040
[_EKT_PVR_ResetProgramInfo]:0x812a2c30
[EKPVR_Porting_RecorderInit]:Init PVR successfully
pvr2.0 init-ed!
[[supernova]] MApi_AUDIO_WritePreInitTable doesn't need to init again
HAL_MAD_SetCommInfo: infoType[44,0,0] not Supported
MApi_AUDIO_Initialize doesn't need to init again
???????? Important,The MMAP ID(18) does not existed!, please check it...
???????? Please update the right system configure...
???????? Important,The MMAP ID(19) does not existed!, please check it...
???????? Please update the right system configure...
===== Check Audio Decoder Protection from hash-key IP =====
Hash-key Support DD.
Hash-key Support DD+.
Hash-key Support Generic HE-AAC !!
Hash Key Check WMA Fail, No WMA license!!
Hash-key Support DRA.
===== Check Protection IP End =====
[EKSML_SetLangIndex] Audio Codec [0x0]
[EKMBA_IsMsgBoxShow][LINE:867] Error. Please init MsgBoxArbiter module
[EKMBA_IsMsgBoxShow][LINE:867] Error. Please init MsgBoxArbiter module
[_MDrv_PNL_Init_LPLL][295]pstPanelInitData->u16Width=1920, pstPanelInitData->u16Height=1080
[_MDrv_PNL_Init_LPLL][297]u16HTotal=2640,u16VTotal=1125,pstPanelInitData->u16HTotal=2640,pstPanelInitData->u16VTotal=1125, u16DefaultVFreq=50
[_MDrv_PNL_Init_Output_Dclk][340]pstPanelInitData->u16Width=1920, pstPanelInitData->u16Height=1080
[_MDrv_PNL_Init_Output_Dclk][342]u16HTotal=2640,u16VTotal=1125,pstPanelInitData->u16HTotal=2640,pstPanelInitData->u16VTotal=1125, u16Default0
[_MDrv_PNL_Init_LPLL][295]pstPanelInitData->u16Width=1920, pstPanelInitData->u16Height=1080
[_MDrv_PNL_Init_LPLL][297]u16HTotal=2640,u16VTotal=1125,pstPanelInitData->u16HTotal=2640,pstPanelInitData->u16VTotal=1125, u16DefaultVFreq=50
[_MDrv_PNL_Init_Output_Dclk][340]pstPanelInitData->u16Width=1920, pstPanelInitData->u16Height=1080
[_MDrv_PNL_Init_Output_Dclk][342]u16HTotal=2640,u16VTotal=1125,pstPanelInitData->u16HTotal=2640,pstPanelInitData->u16VTotal=1125, u16Default0
DAC eTiming =6
DAC eTiming =6
HDMITx eTiming =7
Error!! please add AGC table
>>>>>>>>>>>>>> yaunqinhao 2 cropheight != 0
Source Video Size Error!!
HD width = 1920 height = 1080
[yuanqinhao] SD DstWin dispInfo x = 0 y = 0 width = 720 height = 576
Source Video Size Error!!
sd width = 720 height = 576
>>>>>>>>>>>>>> yaunqinhao 2 cropheight != 0
Source Video Size Error!!
HD width = 1920 height = 1080
[yuanqinhao] SD DstWin dispInfo x = 0 y = 0 width = 720 height = 576
Source Video Size Error!!
sd width = 720 height = 576
[EKMBA_IsMsgBoxShow][LINE:867] Error. Please init MsgBoxArbiter module
[EKMBA_IsMsgBoxShow][LINE:867] Error. Please init MsgBoxArbiter module
>>>>>>>>>>>>>> yaunqinhao 2 cropheight != 0
Source Video Size Error!!
HD width = 1920 height = 1080
[yuanqinhao] SD DstWin dispInfo x = 0 y = 0 width = 720 height = 576
Source Video Size Error!!
sd width = 720 height = 576
[EKT_APPTestCode5043][45] EKT APP test start!
[smlbsm_stb_start_from_ps][56] eEvent = 2[smlbsm_AV_play][77] start!
ektglp_update_group_focus_ex() LINE[1161] List not exist, set focus to default.
ektplb_get_list_handle_by_focus() LINE[119] Error : Invalid param!
[ektglp_change_focus_list_handle][1121]pstListHandle = -2118831536
ektplb_get_list_handle_by_focus() LINE[119] Error : Invalid param!
ektglp_update_list_focus_item() LINE[1243] Have not play focus, set to default!
Error!! please add AGC table
Can't find out selected GPIO device 0!!Please add GPIO device into system.cfg
Error!! please add AGC table
Error!! please add AGC table
Error!! please add AGC table
Message::Send - Form 72 Cmd 5 Callback is null
Message::Send - Form 72 Cmd 2 Callback is null
Error!! please add AGC table
Looping...
Реверс приставки dvb-c DCD2304[DCD4304] МТС
Reply With Quote
Thanks